The purpose of the Pyrotechnic Artists of Texas, otherwise known as PAT, shall be to promote and encourage safe, legal and artful pyrotechnic design, construction, operation and enjoyment in Texas through training, demonstration and exchange of information.
Had some edits to the flyers ... See MoreSee Less
- Likes: 13
- Shares: 0
- Comments: 2
2 CommentsComment on Facebook
Posters???
Are we supposed to lie on the ground?
Friendly reminder, deadline for pyroland group buy is April 15th. Info on talk.fireants.org
Their waterfall effect is Fantastic
... See MoreSee Less
Pyrotechnic Association of Texas
make, shoot, chat about fireworks0 CommentsComment on Facebook
For the 4X4 Competition.
You will be given a 4ftx4ft square in which you can place your 1.4g. nothing can be outside of this square. Only consumer 1.4g with an ex# can be used (nothing home made). must be scripted to music and last between 4min 15sec and 5min 15 sec. the pyro must be secure in that it can't fall over. the method for securing it is upto you, but it will be checked. you make break cakes apart and refuse items as desired. NO 1.4G Proline can be used.
... See MoreSee Less
3 CommentsComment on Facebook
I'll come and play lol
Need to start putting the finishing touches on mine.
Mines in the can
There have been some requests made on some horse trading at the event. If you want to bring some extra chems, equipment, or things that you made to sell (like those nice rocket scoops), I'm for it. You just can't sell or trade the obvious manufactured materials. So if you're looking to trade some rocket tooling, or made some fantastic pyro art or nick naks, or want to part with extra charcoal, feel free. ... See MoreSee Less
1 CommentComment on Facebook
Any vintage firework collectors coming out?
Also, if you want in on the pyroland group buy, check it out a talk.fireants.org orders would need to be submitted by April 15th. ... See MoreSee Less
0 CommentsComment on Facebook
Good day Fireants. Setting up for the event. If anyone wants to script and setup a 1.3g 5 min display during the event. Submit a script to Jeremy Jandreau. IF you are using your own shells, budget for around $1250 worth for reimbursement. If you need shells, the club will provide (rough estimate) 6-6in shells, 12-5in shells, 60-4in shells, 72-3 in shells, and will see about 2.5in salutes. 1.4g will not be provided in this, but you may add it as you see fit. Shells provided will be assorted effect, if looking to sort out specific effects, please let me know.
Mortars and cobra mods will be supplied. please script it in cobra show creator or finale 3d for simplicity as it will be combined with 2 others.
Only requirement to try is to be a member. Please keep the number of positions simple as the equipment is borrowed and we'll be setting up more than one at a time. please submit your script by april 15th, and let us know if you'll be providing shells or need them provided.
More info on the event to follow.
... See MoreSee Less
0 CommentsComment on Facebook
PAT - Member Showcase with Competition - April 2024
Details attached.
... See MoreSee Less
2 CommentsComment on Facebook
Can't wait to see what everyone has made.
I was wondering when the 4x4 is and how many competitors do we have ?
Pyroland group buy info at talk.fireants.org ... See MoreSee Less
1 CommentComment on Facebook
Do we have or purchase from Riakeo Happy Family Fireworks Mfg.Co.,Ltd ? Is there a distributor in TX that handles this line?
Good news. Chris Stacey is running the spirit of 76 group buy and I'm working on one with pyroland. I'll get in touch with Spirit and follow up on their answer, but pyroland has also given members the green light to buy pro line without the need of licenses. Membership with PAT is acceptable IAW with the law and policy. ... See MoreSee Less
9 CommentsComment on Facebook
Info on Pyroland list?
Info
When will we get the price sheets
Also do we now how many 4x4 boards are there going to be.
Group Buy is up and running. Information can be found on the forum on the PAT website.
I'll probably put up the group buy for igniters on the PAT forum. I'll probably also put up some 1.4pro/consumer if anyone wants to hop on my order and I'll bring it up to pyrofest if any club members are interested.
When do we get to see pyrolands list
I don’t see any lists on website anyone send a link please
Pyroland list will be a couple weeks as they're not finished with 2024 pricing
🤣30 minute Illegal Fireworks Display in Downtown LA (CRAZY)🤑
... See MoreSee Less
3 CommentsComment on Facebook
Doesn't this happen like every couple months ?
So in thirty minutes they didn't see anyone shooting the fireworks? Unless they have unlimited visco. Cracker Jack police work LAPD!
30 mins? Multiple firing positions and nobody knows anything?
My apologies, I thought I had posted already. Spring pyrofest is set for April 26th-28th at Nelson's fireworks in Caddo Mills, TX ... See MoreSee Less
7 CommentsComment on Facebook
TEXAS! #FullSend #LoneStars
I’m your huckleberry
See yall there. I'll be posting a group buy for igniters about a month prior to pyrofest, maybe earlier.
Dirt Brigante Matthew Hernandez Brandon Hernandez let's go.. Can u give us more info.
Is Saturday the big night?? Just for us who like to watch 😊
Who’s producing displays?
Also wanted to mention that I'll be coordinating a pre-order buy for single shot racks. Any questions you can reach me via messenger or reply to this comment.
If you want to be the 2nd 5 minute display at spring pyrofest, submit your script and any audio to PAT. I'll figure out what the donated shell count will be and list that. The donated shells will not be a limit, you can add to it, but that isn't required and doesn't necessarily add to your chances. Sometimes less is more and creative use of black sky can be of value. Also, upto 3 large fuel mines will be donated.
This is open to any club member/members.
An approximate donated shell count to follow, but feel free to start scripting now as shell counts and types can be adjusted/tuned.
Finale 3d format is preferred, but cobra show creator works as well.
... See MoreSee Less
3 CommentsComment on Facebook
I'd really like to do a show, but my equipment is limited. Is there any chance for the club to provide guns/comet racks? Also is there a deadline for the submission?
Sjon Sorensen
Is this the 4x4
I hope everyone had a great Christmas and is gearing up for a happy new year.
Once the holidays wind down, there will be some information drops on the spring pyrofest event.
Also, if you're interested in judging competition, DM Jeremy Jandreau.
I'd like to look at giving members the ability to sell/trade materials, chems, crafted items, etc. The difficulty will lay in finding a way to allow vending that doesn't prohibit those members involvement from the activities that they wish to perform. Open to suggestions on that.
Also, by the way of Vote, the club has ruled for 3 5min 1.3 displays instead of 1 15min display. I've selected those who will do the 1st and 3rd displays. There will be a contest to determine who will do the second display. Details for that will be posted tomorrow.
Have a great weekend and long live the Emporer.
... See MoreSee Less
1 CommentComment on Facebook
Long live the Emporer!!!
I had a few conversations with John White, one of PAT's master shell builders and teachers. After talking with some suppliers and other builders today, quick match and time fuse are no longer available to be exported the USA from China, per Chinese regulations.
There are work arounds, but this is not good.
- JJ
... See MoreSee Less
3 CommentsComment on Facebook
Couldn't we just cut quick match off shells?
The writing was on the walls a few years ago, I stocked up on several 1000ft ,,, chemical prices are getting just about out reach as well, if you want to continue building best get what you can or get a group buy going on certain must have items, KNo3, Klo4, any fireworks grade aluminum , ect
I guess spolletes and homemade quick match it is.
Merry Christmas! I hope to see you all in 2024! - JJ ... See MoreSee Less
8 CommentsComment on Facebook
Merry Christmas JJ!
Make the day sparkle !
Merry Christmas
Merry Christmas
Merry Christmas!!!
Merry Christmas
Merry Christmas
Merry Christmas and Happy New Year!
Happy Thanksgiving PAT People! - JJ ... See MoreSee Less
6 CommentsComment on Facebook
Happy Thanksgiving JJ. See you in April….have a sparkling day !
Happy Thanksgiving to y’all too!
Happy Thanksgiving y'all
Happy Thanksgiving 🦃 Pyro Family
Happy Thanksgiving
Pyrotechnic Artists of Texas (PAT) Happy Thanksgiving!
The people have spoken. In order to avoid a coup, Spring pyrofest is to be on April 28th, 2024. Pending approval from the land owner. ... See MoreSee Less
4 CommentsComment on Facebook
Can we still have a coup? It sounds fun.
Glad not the 8th...... it would have been another event during eclipse. Marking calendar now.
Someone is spamming fake merch on all the threads on the page. It’s a common scam. Please don’t fall for it.
Did all the approvals happen - are we good for April 28?
All Roman Candle 4x4 board.
Ken Purcell suggested this idea and I'm hoping we as a club and have some fun with it. If you like the idea as well, join us in the link below and lets make this happen.
talk.fireants.org/t/all-roman-candle-4x4-display/604
... See MoreSee Less
9 CommentsComment on Facebook
OMG, DO IT! So many are going to look like:
Is this in addition to the 4x4 battle?
Tyler Sorensen
I mean I'll contribute but I'm still making my solo 4x4' display.
Now that I'm thinking of it how many damn candles would that be ?😳
Ken Purcell Jeremy Jandreau Kira Sorensen JG Pyro New Apparel has Arrived Stock Get it now from here👇👇 us-maylastin44.shop/limited-edition-sy017
4:27 vimeo.com/168165694?fbclid=IwAR3MrEIvN4EeHPsb8k0l3hMMNsU7V3nv9lLmZvxOmpdXJSIhJfNdn2UWCBc#t=274s
Did someone say roman candles
Hey PAT Members,
Chris Roth needs some videos from our PyroFest Member Showcase. Can you post links to the ones you have?
Thanks,
Nick
... See MoreSee Less
10 CommentsComment on Facebook
Julian Sandoval and JG Pyro had good videos
Also if anyone wants a video of just their stuff I'll cut one and send it to you.
Which dates should the spring event be? ... See MoreSee Less
5 CommentsComment on Facebook
Remember April showers for May's flowers .
According to data rain peaks in May plus its 8-10 degrees warmer on average.
April, you'll have spring break to compete with in local areas. May will be graduations and prop, etc. Good on either date from Rockwall perspective..... Just booked week before the May date, so choose quickly, haha. Texas Frightmare Weekend went on sale this week if anyone is wondering what May thing is happening. Warehouses are announcing pop offs/demos and they often run during these times..... LOL, I'm being ADD and super helpful I know.
Memorial Day weekend sounds like a terrible idea, IMO. Too many conflicts for too many people. Also, by that point, some of us are already in high gear, getting ready for the 4th season. Only argument I see for late May is more product should be stateside and available by then. Spring time in east Texas. It’s gonna rain, just wear your slickers and enjoy it!
Leading up to pyrofest if anyone wants me to order some new quickplug igniters that cost almost half the price of MJG. I’ll be bringing some samples for members to try out as well. Price before shipping. 2 meter (box)x50 - $35.00(5-10% discount on 6+boxes) (case)x1000-$575 3 meter (box)x40 - $35.00(5-10% discount on 6+boxes)(case)x1000-$675 If you’re interested just message me. I’ll contact my friend and see when he has shipments arriving. So far I’m happy with the quality and watched one show & demo night fired with them. I believe two wires failed continuity checks overall. Prices may be subject to change and large orders may be able to get more of a discount.
Due to popular demand, there will be a mini 1.4g competition at the spring event. Has to be a Pyro musical, no longer than 5min, fit on a board that is 4ftx4ft length and width. No pro line or OL's.
More rules to be announced tomorrow. This should at least get your noodles going
... See MoreSee Less
16 CommentsComment on Facebook
This is relevant to my interests... I know it's early, but are there tentative dates for the spring event yet?
Breaking down cakes fair game?
Do the mods have to fit on the board?
No pro line? Meaning no “Professional Use Only UN0431 ” and/or nothing from UN0336 that says pro line. I ask because vendors like SO76 sell both.
Is the show limited to one board?
Keep in mind these are going to be very heavy. Plus 48" width is to wide for my vehicle. I will probably need to cut it in 2 pieces and butt them up in the field.
Asking for a friend…..😳what’s OL’S?
How many entries will there bein total
Good idea. I like it. 👏
Just my two cents: these are affordable enough and only 5 minutes long. I’d say let however many people want to compete, compete…. Well, within reason, not really time for 30 entries…
A board of tannerite. Ok, ok. It would have been grand. A bunch of blue dots for everyone. Rofl
Just finished a first draft for my 4x4. I'm sure it'll get adjusted a few times before spring. It was on my mind so I sat down and scripted it.
Fun. Wish I was closer I'd jump in 🫡
Where’s this at?
What should we do for the Spring Pyrofest 1.3g display? ... See MoreSee Less
12 CommentsComment on Facebook
I vote for the last one lol 😆
Sounds fun. I’d supply the product, at import cost, if I can get it. However, just spoke on the phone today with Raccoon about the order I placed 6 weeks ago and it doesn’t look good for next season. They said they could have it here in September. Yep, that does a lot of good… lol. We’ll see how it plays out.
I still have multiple dots in my vision from the last donut mascletà.
Jeremy Jandreau, I talked to James Howard about the combined single song display idea on Tuesday. He is excited and willing to help. He said that we need to get together and pick product and a general field layout for the show builders to design from. They could then send him a non-addressed script with just time code and product. From there, he could combine the scripts and music so we can shoot the displays on one remote as a combined display. So we can get this idea rolling.
While we are on this topic, A contest for 1.4 product Say a 4x4 piece of plywood pyromusical.
Ask anyone if the remember the club shoot in Barclay! Salutes galore🤣
I think the gauntlet has been thrown. Id join in on the 4x4 fun.
On the 4x4 board what we thinking, just 1.4 consumer, or 1.4 consumer + pro.
Derrick Wilbanks Chris Stasey Jon Biggs Ken Purcell Nick Sainz Joel King Lisa Blackman Eric Anderson New Apparel has Arrived Stock Get it now from here👇👇 us-maylastin44.shop/limited-edition-sy017
Thank Yous for everyone's help at Pyrofest!: Deep thanks to Nelson's Fireworks for supporting the PAT Club for over 25 years & allowing us to hold events onsite at Caddo Mills, prepping the store & warehouse, mowing & prepping the fields, big shoutout to Rex, Robin, & Phil for managing the property and security! Sincere thanks to Carl & Steve for pulling the Permits and lending us their shoot trailer. Big thanks to all the Builders bringing their effects, material, and for teaching the classes: John for his amazing shell class, Chris for teaching the star class, Julian for his BP rocket class, Gary for his gas mine class (& for lighting gas mines periodically to assure we're awake) & for his PAT Safety Lecture! Deep thanks to Chris and Walt for organizing the Builder's Showcase Friday night with over 80 member built effects along with builder names & effect descriptions. For the Display Crews: Huge thanks to Derrick for his National Anthem, Micah for his 1.4 pyro musical, Emperor Jeremy for his 1.3 display finished via auto-fire, and to Nick for his 144 salute mascleta. My personal thanks to the mostly new member volunteers who built the racks and dropped the shells for the Builder's Showcase and Jeremy's 1.3G Display, PAT doesn't work without your help. Hot thanks to the Sjon, Tyler, and Gary & company for fighting the 25-30 grass fires during both display nights! Big thanks to Betty & her daughter for running registration & serving food, as well for Ken for managing our website & membership files, and for grocery shopping for food! Big thanks to Nick for making the Builder's trophies and making the merch for our club. Hungry thanks to Julian for smoking pork & boiling some tasty red potatoes to feed everyone on Saturday night. Above all, thanks to all the Members who trust us to put on Safe and Exciting Events, it's through your Memberships we can do what we do! Cheers, JJ. ... See MoreSee Less
7 CommentsComment on Facebook
Set date for next year asap so I can block off calendar.
Thanks to everyone who makes this event possible. I had a blast and can't wait for the next one.
I really enjoyed how active open shoot was Saturday night
It was nice to put together the national anthem and show it off in front of my fellow peers. I only changed the script 20 times. Hell I even changed a few things 30 minutes before I took it out to go set up in the field. Hope to do another one or pyromusical for the club in the near future
Thanks JJ, Thanks to everyone that helped at the event. Having the weight shared is growing and bettering our club!
Great time and a great learning experience, safety was the rule. Thanks to all! See you in Spring….
Don't forget, there will be a lone star shell competition this spring. Rules as follows: only one star may be used, no tails. Can be lifted via rocket or shell. They must be a star, not a type of insert or salute. (IE tourbillon, hummers, etc) don't count. Can change colors, Crossett, etc. Feels free to ask about a specific device if unsure.
Also, competition entries are be limited to 3 per category. The rest will go to builder's showcase.
-the emperor has spoken.
... See MoreSee Less
0 CommentsComment on Facebook
Safety team leads and instructor Gary with his lost demo gun finally back together at PyroFest ... See MoreSee Less
1 CommentComment on Facebook
It was still powered on
A 16” Shell for Saturday Night! This how burning money smells… ... See MoreSee Less
12 CommentsComment on Facebook
Post the video. HDRI SLOW MOTION, please.
What time is the kickoff tonight? I have 2 8 year olds that are excited to watch
does it cost money??
Can’t wait to hear that one!!
Sweet
Wyatt Kelsey
Was an amazing shell.
Brian Nielsen
Loved the shell.
Filled the sky It was beautiful.
Cost?
Burning off some leaders at PyroFest. ... See MoreSee Less
1 CommentComment on Facebook
Brian Nielsen
PAT 1.3G Display Setup! ... See MoreSee Less
2 CommentsComment on Facebook
Brian Nielsen
Amanda Tipton this is why your house was shakin. 😂
Builder’s Showcase Tonight
Cobra - Shell Size / Channel
... See MoreSee Less
6 CommentsComment on Facebook
Wish I was there..but the show must go on. (IYKYK)
Judging was harder than i expected, so many great entries!
Was alot of good builders
Anyone who wants footage of their builds message me.
I know where in the middle of the jokes but who was the builders winners? Oh and who won't the hottest BP in Texas again?
Is there anyone that is on their way that can bring a PA system or that is local that has one for tonight? ... See MoreSee Less
0 CommentsComment on Facebook
FYI, kids under 18 don't need a membership to participate in the Pyro event. They're under their parents. ... See MoreSee Less
0 CommentsComment on Facebook
Mortars and racks for the Builder’s Showcase & Shell Class are onsite at Nelson’s Fireworks in Caddo Mills. ... See MoreSee Less
1 CommentComment on Facebook
Brian Nielsen
Spirit Group Buy received & stored inside Nelson’s Fireworks in Caddo Mills. ... See MoreSee Less
2 CommentsComment on Facebook
Have fun!!
Thanks you guys for putting this together. Can't wait to pick up my order. 😄
Derrick is bringing some competition for builder rockets! PyroFest ... See MoreSee Less
1 CommentComment on Facebook
I cant wait to see what all these talented builders have created.
PAT builder awards all done. PyroFest is this Friday! ... See MoreSee Less
5 CommentsComment on Facebook
a flowerpot award 🤣 That alone makes it tempting to make the drive!!
What are the rocket class sizes?
Those look so nice!
On a side note. Do we have a pa for Saturday?
PAT Pyrofest
Friday, September 29 – Sunday October 1, 2023
Directions and Entrances to the Event:
Nelson’s Fireworks
2768 I-30, Caddo Mills, Texas, 75135.
Nelson’s Fireworks is a large retail location, look for its distinctive signage. Nelson’s Fireworks is located on the West-bound side of Interstate I-30 at the NE corner of FM 1903 in Caddo Mills.
GPS Location:�Latitude 33° 2'39.81"N�Longitude 96°10'51.63"W
Use I-30 Exit 88 if you are travelling West from Greenville.
Use I-30 Exit 87 if you are travelling East from Dallas. From the East, to access the entrance of Nelson’s Fireworks, you’ll have to drive underneath the highway to get to the access road. Turn left at the Stop Sign after driving underneath the highway. Then turn right on Road 1903 just before the gas station. Then turn right into a gravel driveway, follow it to the Parking Lot.
... See MoreSee Less
10 CommentsComment on Facebook
Andy Hartwig: 💥 fireworks
is there an admission fee just to come watch the fireworks show?
Did they make the service roads one way?
Austin Zilk wanna go sat night to watch?
I’ll have some flags and a sign for 1903 entrance to make it more visible.
I hope all of you have a great time stay safe. Much love from FL FPAG
What is this event
Did I miss a post that shows a schedule?
When does it end, everyone is tired of hearing this 😂
Hats in for PyroFest! See you this weekend. ... See MoreSee Less
6 CommentsComment on Facebook
Are those all dummy shells? Thats quite the collection
Karen Peters which color do you want me to pick up for you?
I prefer the one on the right.
Dang I wanted to go but going to Vegas
Jon Salzman Smeade Junior JG Pyro New Apparel has Arrived Stock Get it now from here👇👇 us-maylastin44.shop/limited-edition-sy017
Putting together the builder awards for PyroFest. ... See MoreSee Less
1 CommentComment on Facebook
Look forward to seeing what everyone has made. I can't wait to learn how to build myself.
Anyone in the Dallas area with an FEO interested in doing cold spark machines for venues in the area? ... See MoreSee Less
0 CommentsComment on Facebook
PAT Shirts in for PyroFest!!! ... See MoreSee Less
1 CommentComment on Facebook
Was there a preorder?
If you're interested in signing up for the shell building class, email: extreme1.3g@protonmail.com
Learn to make 4inch ball shells.
... See MoreSee Less
2 CommentsComment on Facebook
What time on Friday?
My daughter and I will be in that class ❤️
Apologies for not being clearer about the event. The classes are included with the event fee. You do need to be a member to handle product. The membership is good for a year. We currently do a spring and a fall event.
Info at
... See MoreSee Less
Fireants.org | Pyrotechnic Artists of Texas
Welcome to The Pyrotechnic Artists of Texas! The purpose of the Pyrotechnic Artists of Texas, otherwise known as PAT, shall be to promote and encourage safe, legal and artful pyrotechnic design, const...0 CommentsComment on Facebook
For clarity, builder's showcase/competition is happening Friday September 29th, not Saturday the 30th ... See MoreSee Less
1 CommentComment on Facebook
Is that the day before Saturday? Asking for a friend!
... See MoreSee Less
4 CommentsComment on Facebook
Pyrotechnic Artists of Texas (PAT)
What are the rules for minors? I have a cousin that is interested in pyro that’s around 16.
My Son, Edric, is that age and is building shells, Mines, and Smoke Bombs. He is welcome to join in that or participate in the other stuff as well with your supervision. He is also bugging the rocket guys to see if he can make 6 small rockets to put on a girandola frame he has.
Let us know so we can get ready and get EXCITED!!! ... See MoreSee Less
6 CommentsComment on Facebook
Any collectors coming this year?
I have about 16 shells I built at Chris' Pyro Palace. I don't remember all sizes but I should have a few Jelly Fish between 4 and 6 inch, a LONE STAR shell 5inch?, a set of Pony Tail / Horse Tail shells 3"?, a High Density 6" are there any I'm forgetting? Carlos Navarro or Jeremy Jandreau you remember?
3 6in leafless palms with coconuts
And a rocket that descends using helicopter blades that probably won't work
... See MoreSee Less
1 CommentComment on Facebook
Send info on your entries (item size, description) to rothcf@yahoo.com by Sept 20th. No limit on number of entries.
If you're interested in signing up for the shell building class, email: extreme1.3g@protonmail.com ... See MoreSee Less
2 CommentsComment on Facebook
JG Pyro
Great class. The spring class shells where really nice.
... See MoreSee Less
2 CommentsComment on Facebook
Pyrotechnic Artists of Texas (PAT)
Brian Nielsen
... See MoreSee Less
5 CommentsComment on Facebook
Heck yeah.
How you gonna dry them stars? 🤔
Any vintage pyro collectors in the group we have tons to display and trade if anyone is interested?
Right here bro
... See MoreSee Less
2 CommentsComment on Facebook
Standard 75:15:10 but is there a charcoal restriction?
To clarify... you may ONLY use those 3 ingredients. No other restrictions
... See MoreSee Less
5 CommentsComment on Facebook
What are the requirements?
When is it?
Car pool from San Antonio to location anyone?
Why aren't there dates listed?
Hey Guys! Sorry, I’ve had a few too many irons in the fire lately and am a little late getting this posted. But, let’s get the group buy for the fall Pyrofest going! In addition to Spirit of '76, you may also purchase from my (NTP) inventory of Raccoon and Winda/Wizard product. There is a lot of great 1.4pro items available in the NTP list along with a selection of consumer and 1.3G (obviously, I’ll need your FEL on file for 1.3G orders). I’m also doing a buy for CraigCo comet racks. Let’s get a 30 rack order together from CraigCo and get the 20% off pricing (we can mix and match racks to get the 30 rack discount level).
Priceless and info at talk.fireants.org/t/fall-pyrofest-group-buy-2023/591
... See MoreSee Less
1 CommentComment on Facebook
If you want to get in a CraigCo comet or slice rack order, please get that to me ASAP. See details at talk.fireants.org/t/fall-pyrofest-group-buy-2023/591 As in, preferably get them in this week. I'll pick them up at Sky Wars. CraigCo has set a deadline of Sept 15, but if we have a large order, we should get it in sooner. Thanks!
Building at the Pyro Palace for PyroFest. See you in October. ... See MoreSee Less
12 CommentsComment on Facebook
Amazing shop!
Nice shop, when and where is the Fall pyrofest going to take place ?
Nice
Wait I recognize those trophies. I know where you are, lol. Wow, amazing tines. 👏
Working myself
have you released the date and location in october?
I am soooooo jealous
Roth PGI Trophies: "Shiny and Chrome"!
Pyrotechnic Artists of Texas (PAT)
Rub it in and send pics...I'll probably be in Ohio working. 👩💻
See you in September - dates are Sept 29 - Oct 1.
Lionel Hibbs Johnny Chavez Harley Johnson Derrick Wilbanks Emily Hartwig Santiago Ramirez Pyrotechnic Artists of Texas (PAT) Ultratec Special Effects Kathlene Schneider Chris Roth Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
Working on a Hat Design for Fall PyroFest. Do we have enough want for a Military Alt as well as the Texas Flag Version? ... See MoreSee Less
13 CommentsComment on Facebook
Military!!!
Will these be cap style or trucker hat style that are tall?
Dibs
Will there be shirts?
I would a kids tee
I would love a hat
I’m down
I need a sticker for my work box
I would buy one of each
Both!
Adam Ragland
I think both are killer
Miguelito Garcia Julian Sandoval Pyrotechnic Artists of Texas (PAT) Joel King David Conrad Derrick Wilbanks Allan Johnson Andy Warwas Julie Ragland Jason Ramm Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
Video of the PGI Oshkosh 2023 - MUM Member Built Display:
www.youtube.com/watch?v=mLw-SZsaQtI
(we'll get better video later)
Congratulations to the MUM Pyro Family , led by Derrick & Hailee Miller, for their very successful display! The MUM Pyro Family prepped all the product, supplies, gear, and supplies for the week months in advance. A 70 person class of PGI members, mostly new builders, spent all week at PGI building & loading all of the effects: including 3"-8" shells, mines, comets, & salutes. They were taught by MUM Pyro Family members.
JJ thanks MUM for trusting him to be the Display Lead. It was also a PAT Member group effort to help MUM get this show done: I thank James Howard of Pyroific Fireworks for lending me tons of pyro llama parts, giving me used Spirit tubes, and for adding Cobra addressing into Hailee Miller's script. I thank Duke Burge of Diamond D Pyro for giving me used Spirit tubes. I thank Carl Standridge and Steve Vaughan of Big Boom for lending me 19-36M's & 72M's. I thank Brian Wood and honorary PAT friends Brad Heitman & Joseph Oye for helping me flash, sync, channel, and label all the Cobra's. I especially thank Ted Lundy, Steve Meade, and PAT Prez Jeremy Jandrau of USG Pyro for towing my trailer to and from Texas to Wisconsin.
The Display had 1847 cues, 47 Pod Positions, 128 Cobra Modules and 122 Cobra Channels. Used Spirit of 76 tubes were reloaded with hand built comets and mines. Spirit and Dominator 45-50mm tubes were reloaded and then dropped into 2" tubes for deployment. The lightning effects were cued to Dragon's Breath gas mines & large ground salutes.
My deep thanks to all who helped out, especially to all the Class Members for their hard work, patience, and good cheer!
JJ
... See MoreSee Less
2 CommentsComment on Facebook
It's a lot of work that's actually fun! Glad to meet you there JJ! See you next time!
JJ, Hailee and I and the rest of the Mum Pyro team cannot begin to thank you enough for your hard work and dedication to this project. Having you on the build team is not only a pleasure but also an honor. Knowing we have a very experienced field operator standing beside us takes the stress level for us down more than you probably realize. At the end of the week when the build part of the show is done and we're able to hand the field off to you for loading is a tremendous relief. Thanks again to Jeff and the rest of the Fire Ants who put in so many hours of behind the scenes work to let a bunch of armatures play with pyro for a week.
PGI Seminar Pre-Registration opened at Noon Today.
Schedule
pgi.org/annual-convention/event-schedule
Instructions
This might be slightly messy so read closely.
Registration starts at noon central time Saturday July 29th. DO NOT SEND THE EMAIL BEFORE THAT!!!!
To register send an email to the email address listed. Make sure you include which class you are signing up for, if you fail to do this you may miss your slot. You can register up to two people with one email. Payments will be taken at the class itself. Please do not sign up if you won't be at the class. You will be taking a spot from someone else.
Example:
To: seminar presenter
Subject: (Daytime Smoke Parachute Shells)
Body:
Person #1 Name: John Doe
Person #1 Phone: 555-888-0909
Person #2 Name: Jane Deer
Person #2 Phone: 555-878-0900
· Introduction To Building Pyrotechnics -- $5.00 suggested donation to cover the cost of handouts: email krugconsulting@comcast.net
· Women's 5" Ball shell w/ Class C Inserts Class 1 Monday August 14th 1PM $25 fee: email foodiegirl.patt@gmail.com
· Women's 5" Ball shell w/ Class C Inserts Class 2 Monday August 14th 4PM $25 fee: This class may be canceled if there is not enough interest: email foodiegirl.patt@gmail.com
· Daytime Smoke Parachute Shells ($25.00): email jetsandfire@gmail.com
· A Time Traveler's Senko Hanabi Kit Workship ($50): email LumosPyrotechnics@gmail.com
· Wizard Wand Hand Fountains Workshop 101 ($40) email LumosPyrotechnics@gmail.com
· Wizard Wand Hand Fountains Workshop 102 -- You do not need to take 101 to take this class. ($45): email LumosPyrotechnics@gmail.com
· Kissing Pinwheels Workshop ($79): email LumosPyrotechnics@gmail.com
· Whimsical Wonders and The World's Smallest Girandola Workshop ($35): email LumosPyrotechnics@gmail.com
· Wizard Wand Hand Fountains Workshop 103 -- Stand-alone class, you do not need to take 101 or 102 ($48): email LumosPyrotechnics@gmail.com
· Beginners 3" Italian Shell Class 1 $40.00 (2:30PM-6:30PM Sunday and 2:00PM-6:00PM Tuesday) -- These shells will be entered in competition -- email jnjm2003@aol.com
· Beginners 3" Italian Shell Class 2 $40.00 (10:00AM - 2:00 PM Sunday and 1:00PM-5:00PM Wednesday) -- These shells will be donated to a display or shot on the B line. -- email jnjm2003@aol.com
Mum Pyro has done their own pre-registration. As of writing this pre-registration for the shell classes are full. Spaces are still available for the Members-Built Display. This is a great opportunity to be part of something larger. Starting from scratch, members will build a display, set it up in the field, and watch the display on Friday. On-Site Registration for all of their classes will be held at 3PM on Saturday August 12th in the MUM Pyro area.
Pre-registration for Tilford classes is also open.
Sparkulating Candelabra ($35.00)
Angel Wheel ($40.00)
Whirling Dervish ($25.00)
To pre-register for these classes go sign into paypal. At the top of the web site you see selections. Click on MONEY. Then click on: SEND or REQUEST. You will see several selections. Click on PAY FOR GOODS or SERVICES. You will see a place to type in. Type in arthurtilford@sbcglobal.net. Click NEXT. Put in the amount you are sending for the workshops. AND, please state name of person attending and for which class, for each workshop on the ADD A NOTE. Then send (USD means US Dollars).
They will get an email from PayPal about your fees payment and at that point, you are registered. Also, if you can send an email to arthurtilford@sbcglobal.net stating that you have registered and for what. This provides a second verification of the transaction.
Failure to follow these instructions to the letter or complaining about the process will be taken as you volunteering to help out with the schedule next year. I thank you for volunteering. Seriously though, our schedule is very full this year and as you can see our members have stepped up and dramatically increased the number of classes being offered.
Dan Muzzey
Seminar Chair
... See MoreSee Less
Event Schedule | Pyrotechnics Guild International
This event is for PGI members, but members can bring non-member spouses and youth at a reduced cost. See our pricing page for details.1 CommentComment on Facebook
All Lumos Pyrotechnics Seminars still have space as of 7/30/2023.
Pyro 1.4g cake with all the club logos. I still need to confirm, but I think they're being sold at PGI. ... See MoreSee Less
8 CommentsComment on Facebook
That’s amazing!!!
SEND IT!
Cooooooool!
Sweet!
PGI 2024. Not PGI 2023. Clubs are still being added to the label design. Hopefully get label design finished within next week or so. Product then needs to be built this winter and shipped to USA.
Yeah there's no way these will be ready for 2 weeks from now lol. I could see 2024
i just want to see it in action in north texas🙌🏻🙌🏻🙌🏻y’all gotta tell us onlookers when & where
Yeah
If you're planning on attending PGI, the MUM Pyro Shell Building Classes pre-register today, July 22, 2023, send an e-mail just after 6:00pm CT today, but Not earlier, to register for shell building or shell/display building classes. Details in the link: ... See MoreSee Less
1 CommentComment on Facebook
Mum
PAT Fall Pyrofest is Sept 29-Oct 1st. Details coming soon ... See MoreSee Less
2 CommentsComment on Facebook
Almost only 4 weeks away 😱
Favor, question: Derrick Miller from MUM Pyro is needing EMPTY Spirit/Ricassa 30mm-45mm tubes for use at their all volunteer PGI Convention 50-person Class & Display, empty Spirit/Ricassa tubes with bases that fit into llama's. I know it's a bit late, but if you have any I'm open to picking them up or paying for shipping. Please DM Nemo Boss if you have any. Thank you! ... See MoreSee Less
5 CommentsComment on Facebook
I have tons of the 60mm. Not many of the 40mm
I got some full 40mm if they want to empty them lol.
I've got a bunch of Dom 50MM I'll be stripping of Lamas later today, I can save em for ya and get em to JJ
Duke Burge Dennis Wood James Howard Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
Duke Burge Dennis Wood James Howard Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
Our whole PAT Community extends our sincere condolences to the fallen pyro's family & friends and our best wishes for a fast & complete recovery to the injured pyro's.
... See MoreSee Less
Officials identify man killed in fireworks explosion at Gilmer event venue
Four other people were also injured in the accident at the Firehouse 9 Farm event center.3 CommentsComment on Facebook
Thank you. He was a good friend and person. He will be dearly missed.
Sad
Dylan Anderson Dennis Wood Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
Also, in case anyone was wondering, we're absolutely keeping the builder's Showcase as a permanent fixture. I'm still going over the competition ideas, there were some great suggestions. To give prep time im going to have some listed here as definite. The rest to follow.
Best small shell (2.5in-4in)
Best medium Shell
(5in-8in)
Best rocket
Most creative device. (Must function and be safe, no ther rules on this)
Trophy for first in each, 2 entries for each are allowed, Best small shell requires 2 of the same shell per entry for consistency check.
... See MoreSee Less
5 CommentsComment on Facebook
I would like to join and be a member and learn to build shells
And get licenced
Santiago Ramirez Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
Getting closer. Was able to get a start on prep this weekend. Sucks where in a burn ban I need to cook some pine and willow for my shells.
Santiago Ramirez Derrick Wilbanks Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
Once hell week is over I'll be reaching out to start squaring up the fall event and getting some classes down and dates confirmed. ... See MoreSee Less
2 CommentsComment on Facebook
Let me know
Jason Ramm Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
Anyone going to Cannes?
... See MoreSee Less
Programme 2023 - Festival Pyrotechnique Cannes
LE Programme AQUARÊVE 14 juillet, 2022 22:00 Découvrir SUREX 21 juillet, 2022 22:00 Découvrir NORTH STAR FIREWORKS 30 juillet, 2022 22:00 Découvrir SAN PIO 8 août, 2022 22:00 Découvrir HANDS ...3 CommentsComment on Facebook
That looks so cool!!
I wish I could
Jamie Hebert Zach Blevins Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
FYI, from TDI:
Fireworks Display Permit Deadlines
If you plan to host a Fourth of July fireworks display that requires a permit on or before July 5:
All payments and paper applications mailed to our office must be received no later than Friday, June 23. This includes funds to be placed in your account (escrow).
Send paper copies of your Permit Application for Class B Fireworks to the State Fire Marshal’s Office, PO Box 12107, Austin, TX 78711.
All fireworks display applications submitted by email must be sent to FMLicensing@tdi.texas.gov by 5 p.m. Thursday, June 29. Money must already be in escrow for any emailed applications received after June 23.
You’ll need to pay an additional permit fee and submit an updated signed site certification from your local authority having jurisdiction if you:
Change the date of the display.
Add a rain date after the show date.
Change or add a firing location.
All fees are non-refundable. There is no fee for adding a rain date before the show date.
Questions? Email FMLicensing@tdi.texas.gov.
... See MoreSee Less
0 CommentsComment on Facebook
All right fireants, 2 points of pyro business to pass on. We WILL be doing another builders showcase at fall pyrofest. No limit on entries so if you want to demonstrate or test something, that's a great time to do it.
Second note. I'd like to add some competition to the club. Any suggestions will be taken into consideration. Categories is the first thing to nail down. As it stands, I'd like to have trophies and possibly some PAT swag.
... See MoreSee Less
14 CommentsComment on Facebook
We just did a Blind pyro competition with donations from many wholesalers, another club did a board competition and had a juniors category as well, limit people in some way and have fun with the results!
I’m down to help with awards. As for competition I’d suggest make some awards up for the show case and announce those. Like best color rocket, best shell 6 inch and below, best shell 8 inch and up, best alternative rocket effect( an effect using more than one rocket). I think we have enough building in the group for that.
Do we have for sure dates for next event?
Going to be nice.
SEND IT!
Sick!
Salute rack integrity contest. 🤠
What about a cake raffle everybody brings one and we have a raffle.
I'm down for a blind pyro competition!! I have NEVER been to Sky Wars or Chris Stacy's event but I'm definitely going to both this year, I don't care if I have to freaking walk I'm going!!!
Thought of another idea a 2 ft x 4 ft board with a show on it only 8 square foot show !
Best $100 dollar show?
So when is fall Pyrofest and how do I get into make or learn how to build fireworks feel free to msg me I would love to learn it's a dream of mine
Jon Salzman Nick Sainz Gregory Hebert Derrick Wilbanks Harley Johnson Tony Madrid Jeremy S Horvath Joel King Joshua Ezekiel McGregor Santiago Ramirez Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
Jon Salzman Nick Sainz Gregory Hebert Derrick Wilbanks Tony Madrid Jeremy S Horvath Joel King Joshua Ezekiel McGregor Santiago Ramirez Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
I'm considering dates for fall Pyrofest. I'm currently considering late September or October. Definitely not during sky wars, ozfest(builder event in ozarks), and Chris Stacy's event. Are there other scheduling conflicts I need to avoid? ... See MoreSee Less
11 CommentsComment on Facebook
National Hobbit Day is on my birthday. (Pretty big event around my house!)😎
Looking forward to it
Current tentative options are sept 29-oct 1st or oct6th-8th
Sept 29-Oct 1 works for me
Eclipse
September 29 October 1st sounds good to me
Sept 29th to Oct 1 is good!
Sept 29-Oct. 1
Duke Burge Delvin Bridges Gonzo Gonzalez Nathan Starr Starr Derrick Wilbanks Julian Sandoval Nick Hill Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
Did a date get set? I need to make plans, too many options. On the 29th Pyrofest is my #1 choice. But if it is not that weekend I need to commit to #2.
Duke Burge Delvin Bridges Gonzo Gonzalez Nathan Starr Starr Derrick Wilbanks Julian Sandoval Nick Hill Margaret Wood Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
PAT Spring Display, first 12 seconds are dark, because of the delay in the script. ... See MoreSee Less
5 CommentsComment on Facebook
Wow! That's awesome!
It was awesome. Looking forward to next year for sure!
Really wish the music had worked, but the display was gorgeous regardless! Loving seeing it again here with the soundtrack.
Daniel Venable David Miller Kcl Karl Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
Daniel Venable David Miller Kcl Karl Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
Thanks to those uploading videos and photos. Here is a link to allow members to download. Keep the videos and pictures coming. ... See MoreSee Less
0 CommentsComment on Facebook
Please Share Your Photos and Videos from Spring PyroFest.
... See MoreSee Less
6 CommentsComment on Facebook
We especially want video of the main display. James wants to make a video adding the music so everyone can see it with the sound that didn't play.
Springfest 1998!!! Recognize anyone!!??
Springfest 2023
Drone footage...I know it's out there...must have so I can edit in with fix camera footage AND the music 🙂
Gregory Hebert James Howard Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
Gregory Hebert James Howard Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
Builder shout out ... See MoreSee Less
4 CommentsComment on Facebook
I have a feeling we'll need more racks at fall fest.
It was my first time for any legit meet up. I'm inspired. Just bought some scrap titanium, bismuth trioxide. I'm going all in
Are you VP or how you rolling now?
Derrick Wilbanks Bryan Mc Jon Biggs Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
I'd like to thank everyone that came out to spring pyrofest. I hope everyone had a good time. Big thank you to Carl for handling the permit, donating product and mortars for the 1.3g side of the display. Thank you JJ for helping on all aspects of the event and giving another great safety demonstration. Thank you to former El Presidenté Nick Sainz for helping sort out what needs to happen. Thank you to John White for another awesome shell building class. Thank you James Howard for that outstanding Blind display with 1.4g and 1.3g. Thank you Rex Nelson for hosting us and preparingthe site. A huge thank you to Robin Eaton for getting everything ready and helping out with everything. Thank you Ken Purcell for the back end support. Thank you to Chris Roth for the builder's Showcase and Walt Shires for the awesome BP competition. Thank you Brent Black for the charcoal making class. Thank you Betty Sainz for helping with registration. Thank you Greg Hebert for providing the audio equipment and helping out.
I know this is a long post, and it would be much longer if I had the time. I'm thankful to everyone that came out and everyone that helped make this happen. I appreciate everyone's patience with me as this was my first event as El Presidenté.
It was a great learning experience for me and I got to see what went well and where I can smooth things out. I look forward to squaring up the fall event and hope to see you all there.
-Jeremy Jandreau
... See MoreSee Less
6 CommentsComment on Facebook
Great job to everyone involved, thank you for putting on the event!
El Presidente in the wild! Enjoyed the fuel mine class.
Damn sorry we missed it! Hopefully the next time❤️
Bummed that I couldn’t make it. I’m a new member from the Austin area and was hoping to come and possibly meet any builders who live in the greater Austin area. My main interest is rockets. Hopefully I will make the next one!
Julian Sandoval Jason Huff Lisa Blackman Jeff Keverline Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
Julian Sandoval Jason Huff Lisa Blackman Jeff Keverline Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
More thank you's coming this week. Huge prop's to Carl & Steve from Big Boom Pyro for bringing their shoot trailer and product! And to James who skillfully & quickly incorporated it last minute into his great Pyrofest display on Saturday night! Hint...also camp near where James parks his Blackstone. ... See MoreSee Less
6 CommentsComment on Facebook
Son of a gun, didn’t know about the Blackstone… 😔 I’ll make up for this missed opportunity at Sky Wars…. Be ready James Howard All, Great job on the event this year. There was an “air of organization” that I hadn’t previously seen. Also, the builders showcase was fantastic!
The sausage was on point, plus James cooks bacon PERFECT! Shout out to Jeremy Jandreau for letting me crash at his cabin and shout out to Nemo Boss for putting Carlos Navarro and Carlos Bazemore in a cabin he had reserved. The cabins are rustic, but the company is Divine!
What was the deal with Topo Chico water? I saw everyone drinking them in all different colors. I got to know?
I am taking the plunge!
Chris Stasey Nick Sainz Julian Sandoval Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
Chris Stasey Nick Sainz Julian Sandoval Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
Words cannot describe the sheer competitiveness & high quality of insults with accusations of cheating that was the Pyrofest Black Powder Competition! Three fiercely fought Baseball Launching Competitions: Time in the Air, Accuracy, & Just Land in the Water (in high wind). Give 6-pyro's stop watches, just imagine...suffice to say that one competitive result was decided by Paper, Rock, Scissors! ... See MoreSee Less
5 CommentsComment on Facebook
Thanks to Walt and the guys for making the BP Baseball a staple event of PyroFest. Love seeing it at events and hearing about the shenanigans.
The forest may or may not have added a baseball to its inventory
Nick Sainz Jeremy Jandreau Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
Nick Sainz Jeremy Jandreau Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
PAT Builder's Showcase - Of course the Builders: Derrick, John, Chris, Matt, Walt, et al, deserve all the artistic credit. My deep thanks to Adam, Miguelito, & William for their help in setting up all the Showcase gear & Cobra's and muscling the 16" shells into tubes leading to safe launches. Y'all rock! ... See MoreSee Less
6 CommentsComment on Facebook
What a great time!
Loved the showcase. Can't wait for fall fest.
Already looking forward to the fall event!!!
Great job on setup. Made the showcase a stand out of the event.
Derrick Wilbanks Allan Johnson Pyrotechnic Artists of Texas New t-shirt YOU Can get it Here ⬇️⬇️⬇️ one-click-one-buy.shop/pyrotechnic-artists-of-texas
Julian Sandoval Derrick Wilbanks Allan Johnson Nick Sainz Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
Some pictures of a great bunch of new Members and old friends(Collin & Carlos squared) who setup the 1.4G/1.3G Main Display! Here's the crew that surmounted the mud on Saturday morning to load the 1.3G Shoot Trailer, which led to James Howard's magical display later that evening. "Magic Knot" & "MuxBird" - "This is the way!" ... See MoreSee Less
0 CommentsComment on Facebook
Fire fighting at PyroFest. ... See MoreSee Less
6 CommentsComment on Facebook
Lol
Due to the price of gas and fuel fireballs have been downgraded for more efficiency…
Anthony Rampino
Gregory Hebert Jon Biggs Derrick Wilbanks Rebecca Armstrong-Rampino Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
Photos from Pyrotechnic Artists of Texas (PAT)'s post ... See MoreSee Less
1 CommentComment on Facebook
Setting up at Nelson’s Fireworks in Caddo Mills today for Pyrofest starting on Friday. Rex & Robin, our hosts, have done a great job cleaning up the store & warehouse. John White has his Shell Building Class tables setup. Oh, Group Buy folks, come & get your 13 pallets of Spirit of 76 1.4G! - JJ ... See MoreSee Less
15 CommentsComment on Facebook
When was group buy??
We are going to miss being there this time! Have a great time making big booms!
2 shows this weekend. Y'all have fun!
Shell Building Class is setup!
James "not enuf cash" has unpacked the Cobra's!
On my way!
What time are the gates opening tomorrow
Dallas Texican
Lorenzo Ortega
Packed and ready see yall in the morning. Who's bring donuts?
Nice, not sure about donuts. But, Robin is making coffee.
Have fun. Be safe. I'm picking up product this weekend or else I'd be there.
yay Firework season!
Gregory Hebert Rachael Hill Duke Burge PyrotechnicPyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
For the 1.4g display, James Howard will be running a blind shoot. This is a great experience for pyros looking for a challenge.
Ever want to see how to throw a 1.4g shoot together on a day's notice? This is that class. If interest, find James or Jeremy Jandreau at Pyrofest on Friday!
... See MoreSee Less
6 CommentsComment on Facebook
Skywars teaser!
👏🏻👏🏻👏🏻
What fun! 🍿
... What is a blind shoot?
Do they try to script it or step fire?
Smeade Junior Elvira Delgado Jeremy S Horvath William Moyes Jon Biggs Pyrotechnic Artists of Texas ( PAT) New t-shirt You Can get it Here 👇🛒👇 jxy-cloth.shop/limited-rif-30
For those arriving early on Thursday for PyroFest, we are starting at Noon. ... See MoreSee Less
1 CommentComment on Facebook
What’s happening Thursday?
... See MoreSee Less
5 CommentsComment on Facebook
Congrats! Appreciate you taking on the task of herding the cats.
I plan to bring some CraigCo racks, some DR11 Mortar racks, and some Cobra gear for open shooting.
I will be bringing my sound system. Many of you have seen it in use there before.
Looking forward to it!!
The new El Prez 🙌🏼
John White is looking for two people who can operate wasps to wrap the shells after the class as John will be setting up for the showcase. ... See MoreSee Less
2 CommentsComment on Facebook
Can anybody do this? Does he need somebody with experience? I’m sure with experience would be preferred, just asking.
Last year a few people, including myself, helped run the wasps after class. I would be happy to help John again this year, but I will need someone who knows the whole process (i.e. John) to supervise and deal with the unexpected, since I am pretty new to the process.
... See MoreSee Less
7 CommentsComment on Facebook
Boom boom boom looking forward to it!
Well, I pulled the trigger! I'm coming to Pyrofest!
Will we have any vendors? Like selling pyrotools racks paper tubes mortar tubes?
Did the buyer keep the Nelson's name?
PAT Pyrofest - Event Guide: qr1.be/0UO5
I don't think I'll be able to teach a full blown class on gerbs . But if you're interested in making one catch me at my table and we'll build one. Also if your wanting to build a DVC or a helicopter. I am bringing some of my wings for those.
I assume the tickets haven't ran out. I bought 2 extra but my friends aren't going to be able to make it. don't want a refund or buy from me, just want to be sure everyone who wants to go, can.
PAT Builder's Showcase - Friday Night - April 28th
If you’d like to participate in the PAT Builder's Showcase, let Chris Roth rothcf@yahoo.com know by April 19th.
At a minimum, he will need your name, device size, and brief description of item.
If the member wants to add just a touch of personal info the audience would know “who” the name is a bit better.
Info such as:
- Where the maker hails from.
- How long has the maker be working in/making pyro.
- How long has maker been affiliated with the club.
- What type of pyro the maker enjoys the most.
- Etc.
... See MoreSee Less
1 CommentComment on Facebook
Loved the builders showcase. This is a must from now on.
My apologies, but I uploaded the wrong schedule for the spring Pyrofest event. I changed the QR Code in the original post to the correct schedule. At the event we'll have the QR code so you can pull up the schedule and map on your phone and a few printed copies. ... See MoreSee Less
2 CommentsComment on Facebook
Can you email the schedule? I don’t have 2 phones to scan a QR code with my other phone!
Thanks for putting a schedule together this year!!!
PAT Spirit Group Buy!
Fellow PAT members,
It’s time to get the group buy going for the 2023 spring event.
This buy is open only to PAT members and must be picked up in person at the Spring Pyrofest in Caddo Mills.
Please find the price list here:
www.dropbox.com/scl/fi/fuyss2ya98wawqktn8bq9/PAT_group_buy_pricelist_spring_2023.xlsx?dl=0&rlkey=...
Let’s figure 10% for shipping and we’ll settle up any difference once the final total is known.
If possible, please use the spreadsheet. All you have to do is enter the order quantity and the spreadsheet will do all the math.
Payments can be sent via
Paypal or Zelle to: cstasey75@gmail.com
or
Venmo to @Chris-Stasey
Please fill out the name, payment address, and phone number information at the top of the spreadsheet (helps me track where to find the payment).
Order and Payment Cutoff will be April 15th, 2023 at midnight. Payments must be received before your order will be made.
Feel free to direct any questions to cstasey75@gmail.com
Thanks,
Chris
... See MoreSee Less
PAT_group_buy_pricelist_spring_2023.xlsx
Shared with Dropbox2 CommentsComment on Facebook
Last day! Get those orders in!!! See you in Caddo!
Our sales rep at Spirit is out of the office until Tuesday. So…. I’m extending the deadline to get any orders in until 5pm on Monday, April 17th. Last chance! See you in Caddo!
The Schedule has had some changes made to it. Unfortunately I had uploaded the wrong one.
Schedule and map for the Spring 2023 PAT event
... See MoreSee Less
4 CommentsComment on Facebook
What is this?
I'm ready for spring pyro festival. Ive been waiting since it ended last year. To me this event is like WrestleMania but with fireworks.
Hard for me to read lol
During open shooting on Friday, can we set off some 1.4G Pro product? There are some items I would like to preview for this summer. It wasn't clear if the Maroon box was just for the official 1.4G display or if the B line should be used.